Andee 101 Support

Downloads

Arduino Andee Library

Download

Topics

Getting started with the Andee Arduino 101 is easy. Simply follow the steps listed below to get started!
  • Connect your andee to your arduino board. The Andee Arduino 101 pins should line up properly with the pins on your Arduino.
  • Download and install the latest version of the Arduino IDE from here.
  • Download and install the Arduino Andee Library. Refer to the instructions below for library installation.
  • Code your Arduino sketch to use Andee Arduino 101 features and load the sketch into the Arduino board
  • Download the Annikken AndeeMobile app and connect to your Arduino.
For more information on setting the sketch with Andee, please refer to our API Reference.
Windows:

Download the library files from the link above. Unzip and move the main Andee folder to C:\Users\<username>\Documents\Arduino\libraries\ or C:\Program Files (x86)\Arduino\libraries\ depending on your Arduino directory.

Mac OS X:

Download the library files from the link above. Unzip and move main Andee folder to ~/Documents/Arduino/libraries.

  1. Launch the Andee app on your smartphone and connect to the Annikken Andee.
  2. Tap on the options button at the top right hand corner of your screen in the Annikken Andee App.
  3. For Android Users: The firmware version of the connected Annikken Andee is shown on the top right of the options page.
    For iOS Users: The firmware version of the connected Annikken Andee is shown at the bottom of the options page.